Build Log RV-10 #1

Blog for a Vans RV-10 Airplane Build

First Engine Start

This weekend turned out to have another great milestone achieved.  I was finally at a state to try to get the engine fired up for the first time. 

I had John Klein, the A&P from Tri State that is located at our home field stop out and monitor in case we had any issues.   

At the first try we did have a small issue with a fuel line that leaked in the cabin tunnel area.  John was able to reach in and get it tightened up. 

Made a couple of attempts at a start with no luck and realized that you need to have the ignition switches turned on first.  Felt kind of dumb on that one.  Turned the ignition switches on and it fires right up.  Couple of small adjustments to idle and mixture and ran really good.   

Had a couple of small issues with exhaust leaks but were easily fixed.  Also had a issue with the prop not cycling but did finally get it to cycle.  Had to use higher RPM to help get it primed. 

Below is a video of the start.  A  bit boring but shows what happened.

 

Engine Cowl

This was not nearly the challenge that I first thought.  Took some time but was not bad.

Will write up more later.  Check out the pics in the meantime.

Engine Baffle Install

Engine baffle time.  Will get a write up later on this subject for you can enjoy some pics for now.

Click on the images to see the full gallery. 

Propeller and Spinner Install

Started working on getting the prop and spinner mounted to the engine.  Pretty straight forward per the instructions.  Getting the cutout on the spinner for the prop was the hardest until I found out that Hartzel acutally has a template.  Oh well, got it anyway.

Got everything mounted and matchdrilled, put in the nutplates and started to work on gap fillers that go behind the prop.  These took some time to get just perfect but did manage.

Sure looks cool with the prop on.  Starting to see a bit of light at the end of the tunnel.

Click on the images to see the full gallery. 

Engine Installation

Great milestone today.  Got the engine mounted to the aircraft and a couple things attached.

More write up to come.

Click on the images to see the full gallery.